A hearty burger and crispy fries are a classic American food pairing, and it’s easy to see why. Even though we don’t eat them as often as we’d like, we’re likely to use our standard cutting board and non-sharp knife to cut slices of potato in a variety of shapes and sizes when we do. It’s a challenge to get those uniformly golden delights as close as possible to the ones we enjoy while dining out!
Our desire for perfectly crisped fries grows as we spend more nights at home. Like me, you probably want the right shape and taste, but with less time and effort spent chopping and preparing. If you’re in the market for a new french fry cutter, this guide will help you find the best one for your needs.
Best French Fries Cutter for Sweet Potatoes
Prepworks by Progressive Deluxe Potato Cutter
You can fit this french fry vegetable cutter on most kitchen counters because it weighs only 2.26 pounds and has dimensions of 12.5 x 4.25 x 6.5 inches. For added stability, the Prepworks cutter is equipped with suctions. Its non-slip handle and one-lever design make it easy to use.
Rubber, stainless steel, plastic, and thermoplastic elastomer (TPE), a rubber-like substance with plastic’s recyclability and processing advantages, are among the materials commonly used in construction.
You can choose between half-inch and three-eighths-inch fries thanks to two sets of stainless steel, heavy-duty blades.
This cutter is easy to clean thanks to the easy disassembly. Dishwasher-safe parts include the pusher plates and blades, as well as the handles. However, you’ll have to wash the frame by hand.
Others have complained about difficulty cutting through larger, drier potatoes, despite the fact that the blades are described as cutting well and lasting for up to five years by some reviewers. If you want the job done, you need to use more force.
Others have found that by slicing off a small portion of the bottom of each potato, the cutting action becomes easier, resulting in perfectly-sized fries.
This cutter’s blades can be hard to come by, but the price is comparable to what you’d pay for a new one.
It’s in the middle of the price range for a cutter at $39.99.
Best Choice Products Potato French Fry
If you have a limited amount of counter space, be aware that this item weighs 10.53 pounds and measures 14.5 x 9.5 x 9 inches. Because of its size, it’s clumsy and inconvenient to move.
Only if you don’t plan on attaching it to a counter or wall can you get away with just the four suction feet on their own. You will, however, receive a sturdy and long-lasting piece of gear.
Commercial-grade stainless steel is used in the fry cutter’s construction, making it rust-proof and long-lasting.
Four blade sets cut potatoes and other vegetables to 1/4, 1/2, and 3/8-inch sizes, with a fourth blade added for slicing oranges and apples. This cutter comes with. This is a great option if you want a wide range of slicing possibilities.
Using a vegetable spray on the blades before cutting seems to help a lot, according to most reviewers, but some claim that this isn’t always the case. If you’re not in shape, you shouldn’t try it; however, if your muscles are weaker, you should.
The parts are simple to assemble and disassemble, making installation and cleaning a breeze. Everything can be cleaned in the dishwasher, and spare parts are easy to come by.
Because of its higher cost, you may be unable to purchase this item.
French Fry Cutter, Wosweet
You can easily handle the Wosweet because it only weighs 2.64 pounds and measures 11 by 4 by 7 inches, making it a good fit for most kitchens. Since it’s made of stainless steel, it won’t corrode like other models. With a strong suction cup that locks, you can use the appliance with confidence.
The long-lasting engineering of the razor-sharp blades is a testament to this. It doesn’t matter if the potatoes are peeled or not, the 304 stainless steel blades glide through them with minimal effort. They’re equally effective with a variety of other vegetables. Despite this, pressing through sweet potatoes is difficult because of their high fiber content. One reviewer was able to get around this issue by heating them in the microwave for a few seconds.
A 16.7-inch handle and an oversized vegetable slot make cutting long, large potatoes a cinch with this cutter.
In contrast to many other models, the blades on this one don’t bend under pressure like those on other models often do. Both regular and shoestring fries can be served on the same grid, which measures three-eighths by seven-sixteenth inches.
Remove the components and wash them as needed by removing them from the unit with soap and water. They are more effective than other brands due to their sharp blades, but users should exercise caution when using them to avoid cutting their fingers.
As long as you match the specifications of the original parts, you can easily find replacements.
The $36.99 price tag is a good value for the high-quality features it offers, especially for those on a tighter budget.
New Star Foodservice 43204 Commercial Grade French Fry Cutter
Cutting jobs in restaurants require equipment that can handle high volumes of food quickly and efficiently. The New Star’s dimensions are 20.50x 10.50x 9.70 inches and it weighs 12 pounds. It has a cat-like aerodynamic shape, with a long lever, an upright tail, and four sturdy suction feet.
There may not be enough counter space in some kitchens to accommodate it due to its size and weight. In addition, the device can be mounted to a wall as well. Strong suctions keep the cutter firmly in place, and its substantial weight also aids in its stability.
Cast iron body with aluminum and stainless steel parts ensures long-term serviceability and sturdiness
As a result, smooth cutting can be achieved with a single stroke thanks to superior engineering. With corrosion-resistant stainless steel blades, you don’t have to worry about blade-vegetable contact.
For perfect fries like you’d get at a restaurant or fast food joint but without all the grease or preservatives, you’ll get three different sizes of blades and pushers: half, one-fourth, and three-eighth inches.
It is common to find that the blades are very sharp at first and that cutting is smooth and easy, but some customers have reported that the blades dull quickly and that more pressure is needed to cut potatoes. Sometimes, silver particles have been discovered in the food.
Taking the appliance apart to clean it has been criticized in some reviews for requiring too much effort. Three thumbscrews and washers and two screws and washers for the push plate must be removed in order to dismantle the device. Once the potato pieces get stuck in the prongs, it becomes a challenge to remove them.
To preserve the cutter’s quality, you must also wash and sanitize it by hand. Additional parts and accessories are available for purchase.
Tiger Chef French Fry Cutter
With a weight of 1.6 pounds, the Tiger Chef fry cutter is easy to move around and doesn’t take up a lot of space in your kitchen. It has rubber feet to prevent it from slipping.
BPA-free, professional-grade plastic is also used in the manufacturing process. Sweet potatoes and other high-fiber vegetables should not be sliced with this appliance, according to the manufacturer.
Interchangeable stainless steel blades, 3/8 and 1 1/2 inches, with blade pushers of the same diameter, are included. Pushers are available with 25, 40, or 45 holes. The knife guide, which makes it easier to cut or dice food evenly no matter how long it is, is also a useful feature. It’s also possible to take it out. The ratchet-style pusher moves food forward in a gradual process until it meets the sharp blades and cuts easily in a few seconds.
It’s simple to dismantle and comes with a cleaning brush so you don’t cut your fingers or hands. It can also be washed. Potato shavings have been reported to get stuck in the grid and be difficult to remove in some reviews.
At $32.99, it’s a good value for the money.
EZFries 2.0 X3001 French Fry Vegetable Cutter
Weighting in at only 1.35 pounds and measuring just 7.53″ wide by 5.33″ deep by 5.33″ high, this countertop microwave oven is ideal for those looking for a small appliance that will fit neatly on their kitchen counter. Suction feet are not required because of the specific design.
A BPA-free, food-safe plastic material has been used in its construction.
Because you don’t have to use your fingers to help push the potato through, the company claims that it is virtually unbreakable and safe to use. There are also no potato snags when using this cutter, unlike other models on the market.
The stainless steel blades are only available in one size, but their sharpness makes them ideal for slicing through even the largest of vegetables. A cylinder at the top of the device, rather than a lever, is used to lower the potato into the chamber.
Using the grid, you’ll always be able to get 49 perfectly sized french fries. An apple slicing tool is included as an additional bonus!
Despite its simplicity, it requires soap and water to be rinsed and air-dried before it can be reassembled and cleaned.
It’s possible that it’s not as slick as other options. However, you’re getting a great deal for your money at just $29.99. If you’re in the market for a new phone, this is a good option to look into.
ICO Stainless Steel 2-Blade French Fry Potato Cutter
At 10.24 by 4.19 by 5.12 inches and 1.25 pounds in weight, the ICO fry cutter is a convenient and lightweight addition to any home kitchen. A sturdy steel base and suction cup lock, along with four additional suction feet, ensure that it stays firmly in place on your work surface.
Three-eighths-inch and four-eighths-inch stainless steel blades and matching grids feature 36 or 64 holes for thicker or thinner fries, respectively. With this high-quality accessory, you can dice, slice, and cube vegetables at home and in the workplace.
The fry cutter’s curved bottom is a unique feature that helps it produce perfect fries with the least amount of effort and force.
Assembling and cleaning are straightforward, but the manufacturer recommends cleaning and oiling the parts by hand to ensure long-term performance.
Even though only a few people have reported their fry cutters breaking too soon, it is possible that they were misused. Sweet potatoes and other dense vegetables, like many others, need to be gently parboiled or microwaved for a minute or two before using as a fry cutter.
It’s possible to extend the life of your knife blades by performing the same procedure on potatoes.
In addition, many customers report that the best results are obtained by first piercing the potato with a couple of small presses before cutting straight through the third time.
A wide variety of replacement parts are available.
The $26.99 price is very reasonable for a cutter that is built to handle tough vegetables, unlike most other options.
ROVSUN Upgraded Patented Commercial French Fry Cutter
Because of its large size and weight of 13.98 pounds, the Rovsun fry cutter falls into the “heavier” category of fry cutters. Some people may find it more difficult to get around. Aside from that, it’s an excellent conversation starter in the kitchen.
In use, the device is firmly grounded in place by the suction feet and solid pedestal foundation, ensuring maximum stability. Durability and health protection are ensured by the use of food-grade, anti-corrosion materials such as 304 stainless steel and premium aluminum alloy.
You can choose from a variety of blades and pusher plates in three different sizes, ranging from one-half to three-eighths of an inch. Cucumbers, carrots, radishes, and onions can also be cut with it. However, the manufacturer explicitly states that it is not for sweet potatoes. (Perhaps the microwave trick from earlier can help here.)
This cutter is ideally suited for both home and professional use because of its superior engineering.
However, cleaning could be a challenge. Some users discovered that the grids needed to be submerged in water for an extended period of time in order to be free of potato pieces stuck inside.
If you’re looking for a high-quality fry cutter, the $83.99 price tag might be worth it, but it’s not for everyone.
French Fry Cutter, Sopito Professional Potato Cutter
There are 10.23 x 5.22 x 7.87-inch dimensions and 4.99-pound weight for the Sopito Cutter. This professional tool is a little more durable than other lightweight cutters, but it still takes up very little space and is easy to carry and use. The silver color and sleek design make it a striking addition to your kitchen.
To keep it in place, it comes with a large suction cup and suction legs. If the area is clean and dry, you’re all set! Because it’s made of solid stainless steel, this cutter will last a long time.
Restaurant-grade 304 stainless steel is used to make the blades that are built to last. They’re great for slicing potatoes, carrots, cucumbers, onions, zucchini, and other vegetables into half-inch slices. It’s almost unnecessary to quarter or half a potato before cutting with this tool’s ergonomic design and long lever handle.
Sopito’s engineers are ecstatic to report that it can also cut through sweet potatoes!
The cutting box can accommodate potatoes and sweet potatoes up to 5.58 x 3.51 inches in size. With just one quick action, you’ll be ready to go.
It doesn’t rust and is easy to clean with water. However, the manufacturer advises not to wash it in the dishwasher, as the detergent could harm the blades.
Replacement of the same model with different sized pushing and cutting plates is supported by the company if desired.
At $49.99, this product falls somewhere in the middle of the price spectrum. If your budget allows it, you’ll get excellent quality for a price that’s competitive with other cutters.
French Fry Cutter for Air Fryer, Reliatronic
While the Reliatronic cutter weighs 2.64 pounds, it measures 15 by 13 by 4.5 inches and is lightweight enough to fit in most kitchens. In addition to the suction feet and lock, the work surface is held in place with ease thanks to their stability.
In addition to an ergonomically designed handle and an extension handle for more dense vegetables, it is made of stainless steel and stable plastic. It doesn’t need to be assembled at all.
There is no need to cut potatoes in half before using this slicer because it can handle vegetables up to 5 x 2.9 x 2.9 inches.
The half-inch and three-eighths-inch rust-proof blades quickly and easily slice through potatoes and other vegetables.
Despite some users’ warnings about the blades’ sharpness, cleaning is a breeze. In addition, users have complained about not always getting everything out of the dishwasher, requiring you to run it through twice or use a brush to finish the job.
Parts are readily available to replace the included blades.
With a price tag of $36.99, this cutter is a good fit for most budgets while still delivering high-quality results.
2 Types of French Fry Cutters
There are pros and cons to both powered and mechanical French fry cutters.
Powered French Fry Cutter
In order to function, powered cutters need either electricity or compressed air. Potatoes can be sent through the blades to be sliced by either an internal motor or compressed air.
Because of the high volume of french fries prepared each week in commercial kitchens, powered cutters are a must. If you’d prefer not have to manually cut french fries, they’re a good option.
Sweet potatoes are a sturdy produce that may test even the strongest knife skills. An electric cutter makes quick work cutting tougher veggies like sweet potatoes, eliminating the need for any physical exertion on your part.
A powered cutter has the disadvantage of needing to be plugged in, thus its placement is limited. This type of potato cutter is more expensive than a mechanical one, and it has more moving and motorized parts, increasing the likelihood that it would malfunction.
A motorised cutter is essentially necessary in a busy restaurant kitchen because manual ones simply can’t keep up.
Mechanical french fry cutters are easy-to-use tools that need human muscle rather than electricity. This style is the most accessible and cost-effective option available.
A mechanical cutter has various features that make it the tool of choice for many professional and amateur cooks. In the first place, you don’t have to worry about finding a spot near an electrical socket, so you may place the unit wherever you like. Having fewer moving parts means a manual cutter is less likely to break and requires less upkeep overall.
Using a mechanical cutter takes considerable effort and fatigue over time. Cut sweet potatoes into uniformly sized strips, ready for frying or baking, with ease with a sharp knife.
In most cases, mechanical cutters are less expensive and more practical for use in home kitchens and smaller eateries.
Sweet Potatoes French Fry Cutters Buyer’s Guide
Choosing a french fry cutter for sweet potato involves answering four types of questions.
The materials used in the cutter’s construction are important even if you’re only a home cook who wants to use it a few times a year. All moving parts should be made of solid cast metal, and the blades should be made of corrosion-resistant stainless steel.
Sturdy crops like sweet potatoes are tough to cut through and would break plastic knives. A blade made of stainless steel is ideal because it is resistant to corrosion, stays sharp for longer, and is simple to maintain.
Dismountable Cutter Heads
The ability to remove the blades is essential for achieving clean, uniform cuts. To get the greatest results, the best potato cutters have sharpening surfaces that can be removed.
Characteristics at large:
Is it a good fit for your kitchen space?
Is it hefty or flimsy in comparison?
What are the materials used to make it?
How user-friendly is it?
Is there a way to keep it in place?
Specifically, how well-knifed and efficient are the blades?
Is it capable of easily slicing through larger potatoes and other vegetables?
How many sizes of vegetables can the blades slice?
Cleaning and taking care of yourself:
How easy is it to dismantle and sanitize??
How long does the product’s quality last?
Where can I find replacement parts for my device?
Unfortunately, most potato peelers and slicers can’t be cleaned in the dishwasher, and even if they could, they’re usually too big and awkward to fit.
Choose a cutter that can be quickly and easily cleaned for this very reason. The machine’s key parts should be easily detachable so that it can be dismantled, cleaned thoroughly, and put back together with least work and time spent.
When it comes to a cutter for sweet potatoes, an ergonomic design is absolutely necessary, particularly if you intend to use a manual cutter.
Cutting potatoes is a laborious task, and anyone who has ever cut more than a few dozen potatoes can attest to the fact that it may be physically taxing on the arms after a certain point. A design that is optimized for ergonomics means that you will be able to complete the task with less effort on your part. You’ll be able to reduce the amount of effort required to cut more potatoes if you do it this manner.
The product’s price should be compatible with your financial situation.
The following product reviews will answer these questions and help you find the best French fry cutter for your needs.
If you are looking for the best french fry cutter for sweet potatoes, any one of the models that we have highlighted above would be an excellent option for you to consider. You shouldn’t have any trouble selecting the ideal sweet potato cutter for your kitchen, provided that you consider your requirements, your available budget, and the features and qualities that are most essential to you in a product.
FAQs of French fry cutter
We’ve covered most of the critical factors to consider when buying a french fry cutter, but most customers have additional questions. French fry cutter questions answered.
Is a french fry cutter multipurpose?
French fry cutters are surprisingly versatile. These gadgets cut eggplant, squash, peppers, and more. Depending on the blade, you can use your french fry cutter on other vegetables.
Can I make french fries in a food processor?
Some food processors include accessories that let you do kitchen activities you never thought possible. Few food processors can prepare french fries, although several do.
Food processors that make french fries can only make one or two styles, whereas a specialised french fry cutter can make six or more.
Is a sweet potato cutter smart investment?
Some doubt they need a fry cutter. If you just use the cutter sometimes, you may not need it. You’ll love the convenience, quickness, and professional quality of a french fry cutter if you create your own fries at home.
French fry cutters are safer, easier to use, and more consistent than knives.